• The KI6354 is suitable for performing continuity checks and locating faults on singlemode and multimode optical fibers and components. A range of more than 5 km can be achieved in certain cases. A single universal adapter provides matching to all standard 2.5 mm optical fiber connector systems. The battery lifetime in blink mode is approx 40 hours for alkaline batteries.
• The KI6354 is suitable for performing continuity checks and locating faults on singlemode and multimode optical fibers and components. A range of more than 5 km can be achieved in certain cases. A single universal adapter provides matching to all standard 2.5 mm optical fiber connector systems. The battery lifetime in blink mode is approx 40 hours for alkaline batteries.
• The instrument can be switched on or off by depressing the black button near the optical adapter for 2 seconds. With the same button the operator can select between a continuous light mode and a flash mode with approx 3 Hz. The KI6354 is equipped with a dust cap. Remove the cap when using the device. Replace the cap after use to protect the optical adapter. The optical connector must be inserted all the way into the adapter.
• To open the instrument, unscrew the pushbutton. Remove the batteries and replace with new ones (2x 1.5v-AAA) then reattach the push button. For correct polarity the positive (+) poles of the batteries should point towards the laser. We recommend using AIMn batteries. Please remove batteries if device is not going to be used for long period of time.
